large slack of line and subscriber cables; no need to measure cables for installation; removable insert enabling splicing up to 4m from the post; does not require cable wells; housing made of thermosetting polyester reinforced with glass fiber in the technology of electrical housings; online customer splicing; galvanized insert; separate linear zone locked with a key; high fiber aggregation; optional: door covered with varnish resistant to UV radiation; possibility to extend the insert and increase the number of connections. Use: outdoor FTTH network main distribution point; underground fiber optic networks. Additional technical parameters: maximum number of customer-side distribution plates in the SC connector standard: 144 maximum number of line-side distribution plates in the SC connector standard: 16 color: Gray weight [kg]: 12 subscriber cable diameter [mm]: up to 7mm bus cable diameter [mm]: up to 12mm max. number of splitters in the ABS housing: 10 pcs max. number of Neptun 24J splice trays: 7 max. number of ARC 12J splice trays: 14 max. cable slack in the cable pocket: 100m mid-span splicing option: YES max. number of subscriber cables after expansion: 36 pcs max. number of line cables after expansion: 9 pcs max. number of splices after expansion: 336 pcs Equipment included: 8 x ARC splice trays for 12 splices (+ 5 extra trays on insert); 2 x ARC tray holder; 153x SCA adapters; 12x 12 telcordia pigtails; 9 x sca pigtails; Jupiter insert; housing made of thermosetting polyester reinforced with fiberglass; 2x rubber cable gland cable ties; necessary bolts and mounting tapes; system lock with key.
