CABLE STRIPPER ROTARY RG11 FOR COMP. AND CRIMP ONLY (98501102)

Technical Data:

• Supported Cable Types: RG11 and similar
• Outer Diameter Range: Up to 10.5 mm
• Blade Spacing: Preset to 6.5 mm
• Adjustability: Precise blade adjustment with included key
• Preset for: 10 mm cable diameter

Features:

• Two-blade construction allows for simultaneous stripping of both the outer and inner conductors in one smooth action.
• Precise blade adjustability ensures perfect preparation for crimp and compression connectors.
• The blades' depth can be finely tuned with the supplied Allen key, facilitating an accurate strip without damaging the cable.

Applications:

• Ideal for preparing coaxial cables for connector fitting in telecommunications, satellite TV installations, and cable television setups.
• Not recommended for use with 4- and 5-fold shielded cables with a diameter of 8-9 mm as it may result in tool damage due to over-adjustment.

Setting Instructions:

• Start with the tool preset for 10 mm cables.
• Test strip by inserting the cable and rotating the tool 4-5 times.
• Remove any insulation residue without damaging the inner conductor or cutting the cable's braiding.
• Adjust the blade depth using the Allen key: clockwise for deeper cuts, counterclockwise for shallower cuts.
• Make adjustments in 1/4 turn increments to maintain control.
• If necessary, reset by unscrewing the blades and readjusting gradually.

CAUTION: Over-tightening the adjustment screws can damage the tool. Avoid using the tool on unsuitable cable types to prevent damage to both the cable and the stripper.